45
LABORATORY EQUIPMENT
BOECO AUTOCLAVE BTE-23D
Features:
A
Three times fractionated pre-vacuum
A
Stainless steel chamber
A
LCD display
A
Equipped with high quality and high performance pump
A
1 tray holder, 1 tray handle and 3 trays included
A
High quality water pump and valves
A
Independent steam generator
A
Two samples self-calibration
A
Overhead type water storage tank, easy to clean.
A
Drying procedure: Dry by vacuum.
A
Sterilization temperature: 121°C and 134°C
A
Test programs: Helix test, B&D test and Vacuum test.
A
Sterilization cycles: 9 cycles are available and 3 test programmes.
A
It only have several buttons, very easy to use, any people can run it easily.
A
All cycles are fully automatic; there is no need for human intervention
in cycle management.
A
Pressure protection locking system that ensures the door will not be
opened once there is any pressure in chamber.
A
Sterilization documentation: Integrated Micro Printer and USB port to
store the information of the programme cycle in flash memory.
A
The sterilization time and dry time can be adjusted by manual, ensure
user to obtain best sterilization effects according to private requirements.
A
Malfunction detection system, corresponding error code will be showed
on the display once there is something going wrong.
Safety:
A
Warning system prevents starting a cycle if door is not properly locked.
A
Triple threat protection for overheating and overpressure.
-
The pressure protection system will automatically cut off the
electricity supply once the temperature of chamber inside is
abnormally. Motorola pressure sensor is used to accurately sense the
state of pressure inside chamber.
Temperature control system is using high quality PT1000
temperature sensor, it is high precision, reliable service and prompt
measurement, ensure accurate and timely transmission of temperature
fluctuation.
The safety valve will release steam in case the pressure inside
chamber exceeds normal levels.
Technical Information:
A
Conform to CE and EN13060
A
Manufactured under ISO 13485 norms
A
Chamber Size: ø 247 x 450 mm (23 l)
A
External dimension: 490 x 480 x 680 mm, Net weight 51 kg
A
Packing box 750x560x460 mm, Gross weight 58 kg
A
Power: 220V, 50/60 Hz or 110V, 60Hz
Program Temperature Pressure Sterilization time Total time
SOLID 134
134°C
2.1 bar
4 min 25-45 min
SOLID 121
121°C
1.1 bar
20 min 35-60 min
LIQUID 134
134°C
2.1 bar
10 min 35-60 min
LIQUID 121
121°C
1.1 bar
30 min 35-65 min
WRAPPED 134 134°C
2.1 bar
4 min 35-60 min
WRAPPED 121 121°C
1.1 bar
20 min 35-65 min
TEXTILE 134
134°C
2.1 bar
6 min 45-65 min
(or wrapped)
TEXTILE 121
121°C
1.1 bar
20 min 50-70 min
(or wrapped)
PRION
134°C
2.1 bar
18 min 45-70 min
B&D TEST
134°C
2.1 bar
3.5 min 22-35 min
Helix TEST
134°C
2.1 bar
3.5 min 22-35 min
Vacuum TEST
-
-
-
15-20 min
Code
Description
BOE 8902300 BOECO BTE-23D Bench Top Autoclave, Vol. 23 l.
incl 1 tray holder, 1 tray handle and 3 trays,
micro printer and USB port, 220V, 50/60Hz
BOE 8902310 BOECO BTE-23D as above but for 110 V, 60 Hz
BOECO BTE-23D
MICRO PRINTER AND USB PORT
This BTE-23D adopts 3 times pre-fractionated
vacuum system, the following chart simply describes
the status of its process
AUTOCLAVE